Bead Crochet Tips and Techniques

Class at BeadFest Philadelphia - Shelley Nybakke's Metalsmith's Match

2010-09-21T07:52:00.000-07:00

This is the best class I have taken at BeadFest.

Shelley Nybakke's A Metalsmith's Match is stitched in RAW (right angle weave) with the heavy metal seed beads and Swarovski crystals. The workshop was 7 hours and I completed most of the bracelet in that time. Later that evening, when I returned home, I stitched another 3 hours for a total of 10 hours. Everyone loves this and it is so classic. I chose the matte gold and antique copper beads with the turquoise Swarovski crystals. I had no prior experience with RAW, so the night before the class I studied the thread path by viewing a few tutorials online. Right Angle Weave may be my new stitching obsession.

Right Angle Weave tutorials:

AroundtheBeadingTable.com

Firemountaingems.com

w ww.beaditbabe.com/RAW.html

Homemade Laundry Detergent

2010-09-21T07:23:00.000-07:00

After seeing a segment on local news about homemade laundry detergent, I searched the internet for the best "recipes" for natural, low suds, cleaning power. I experimented with various ingredients and created my version of homemade laundry soap.

Here's what you'll need:

1 cup Washing Soda ( not edible)

1 cup borax

3 gallons hot water

1 bottle Dr. Bronner's Magic Soap liquid 4 oz., your choice of scent

30 drops of grapefruit seed extract

Mix all the ingredients in a large bucket, a 5 gallon bucket with a lid. The lid is important to keep rodents out as they may enter your home in search of water. The grapefruit seed extract will prevent the water from becoming rancid. Exercise caution with this extract as it is very potent; undiluted, it may burn your skin.

Use 1/4 cup to 1/2 cup per load. I stir the contents before I scoop out the liquid.

The soap particles may congeal after a while and this is normal. Just remember to stir the contents before using. Dr. Bronner's Magic Soap website: www.drbronnner.com

Other sites for homemade laundry detergent

www.thefamilyhomestead.com/laundrysoap.htm
diynatural.com/simple-easy-fast-effective-jabs-homemade-laundry-detergent/

How to straighten C-lon cord macrame, bead crochet, weaving

2010-05-06T09:38:00.000-07:00

When designing a color pattern for a bead crochet rope, I sometimes unravel the entire project and start over. The cord will be very "squiggly" and that makes it difficult to crochet the rope again.

I could move the beads to the other end and cut off that part; but, why do that when you can easily straighten the cord with a simple method you can apply to any nylon cord.

Take a section of cord, about 5 inches, between each hand, and pull the cord apart for a few seconds. I suggest you wear kitchen gloves or some other gloves to protect your hands. The amount of cord between your hands is about 4 or five inches and the amount of tug you will exert depends on how much curl is in the cord. It is important to keep the tension on the cord for a few seconds or more. Move to the next section of cord, pull and hold. The cord is now straightened and, if necessary, you may repeat the process a second time.

(C-lon cord has introduced a new weight called Fine Weight bead cord Tex 135 and is especially good for Swarovki crystal bead and seed beads size 8.)

The results:

To shop for all kinds of threads and cords, shop at your local bead store or visit the website of Marion Hunsiker-Larsen, micro macrame artist.

www.jewelsinfiber.com

2010-04-18T17:15:00.000-07:00

Turquoise bead crochet necklace Tips for working with size 11 seed beads

2010-04-04T20:57:00.000-07:00

The color of the year is Turquoise. I can't resist this beautiful color and especially like the blue/green turquoise. The necklace is crocheted with size 11 Czech seed beads and Guterman topstitching thread.

The purchased pendant is sterling and gemstone

Crocheting with size 11 seed beads:

A softer draping thread, such as Guterman topstitching thread will yield a rope that is more flexible than

a rope crocheted with the micro c-lon cord. IF you are a beginner with this technique I strongly suggest using the topstitching thread and then use the micro C-lon cord to attach bead caps or toggles after the rope is finished. C-lon micro cord is made of nylon and is unlikely to deteriorate over time and for the experienced bead crochet stitcher the tiny size 11's can slide down the thread to the rope, cutting your time in half. The topstitching thread doesn't work as well for speed of crocheting.

Very important to verify the number of beads per row and avoid missed stitches. Every few rows I count the beads around the top to make sure I have the correct number of beads I started with. It is so easy to miss a bead and later realize you have a hole in the rope where the bead should be. This creates a misaligned twist in the rope and although you can sew a bead in later, it's better to avoid this altogether by checking your stitches every few rows. If you have dropped a stitch you will need to remove only a few rows.

Give yourself permission to change the size of your hook even though the instructions state otherwise.

Lately I've been crocheting with a larger size hook and sometimes I use two different sizes for one project.

When I begin, my stitches are "rusty"; then my technique warms up, and the crocheting goes smoothly.

How ot start a bead crochet rope

2010-02-22T07:32:00.000-08:00

Most beginning students have difficulty learning to create the first few rows of bead crochet.

Knowing which bead is next is most confusing and the beads seem to get into a jumbled mess.

Try my method and see if it helps.

You will do the chain stitch first, whatever number of beads you choose, and slip stitch them together to make a round of beads as seed in the photo above.

(5 beads in the round in photo)

Insert a small Philips head screwdriver through the opening in the middle of the round and push the round of beads to the bottom. The screwdriver head makes a nice ledge and the round won't fall off.

This photo shows the crochet hook under the loop of the first bead to be crocheted.

This photo is shot at a different angle and you can see how nicely the beads stay in the proper position.

After a few rounds, you may remove the screwdriver and hold the rope on its own.

A flat head screwdriver won't work as well because the flat end is wider than the shaft, making it difficult to remove the round of beads.

Examples of other items you may use instead of the screwdriver:

right to left: allen wrench, crochet hook, plastic straw.

Tip: the allen wrench works well because it has facets that allow your crochet hook to follow the flatness of the facet. The crochet hook is slippery, but again the flat area where you hold the hook allows the rope to settle there. The straw works well, but will bend if too much pressure is applied.

The diameter of the object you choose must match the inner diameter of the rope. In other words, a rope that is crocheted with size 11 seed beads with 8 in the round, will need a smaller diameter straw, or whichever object you use. Size 6 seed beads may need a larger object. Find one that works for you.

Jewelry display idea - bracelets and necklaces

2010-02-19T06:02:00.000-08:00

My original bracelet and necklace display idea is published on this website:

www.jewelry-display-ideas.com or by clicking here.
I learned how to use common household items to create a display for earrings, bracelets, necklaces, and rings. You too can submit ideas, just click on the link above.

Nail polish keeps track of your tools - bead crochet tips for students and teachers

2010-02-19T05:49:00.000-08:00

Nail polish applied to the ends of your crochet hooks or other tools will help to identify which ones belong to you. Especially helpful when you are taking a class with a large number of students. I used a raspberry red in the example, but any bright color will work. If other students arrive at class with a similar color, you could bring additional nail polish with you and apply the new color over the existing one. The polish dries quickly.

Cooking can be hazardous to your pets

2010-02-14T08:42:00.000-08:00

I purchased a KitchenAid 1.75 quart pan for cooking and decided to read through all the instructions. To my surprise, their was a "Pet Warning" on the front page and I would like to share it with you.

"Fumes from everyday cooking can be harmful to your bird and other small pets, particularly smoke from burning foods. Overheating cooking sprays, oils, fats, margarine and butter will create dangerous fumes which a bird's respiratory system cannot handle. Scorched plastic handles or utensils can also contaminate the air and endanger birds and other pets. Nonstick cookware with polytetrafluoroethylene (PTFE) coating can also emit fumes harmful to birds. Never allow a pan to overheat and never cook with birds or small pets in ro near the kitchen."

Photo is my dad's bird feeder that a neighbor bought him for a birthday gift. The birds are very vibrant yellow and some are brown. They are his outdoor pets and he loves watching them from his back porch.

Bead Crochet Safety Chain for Necklace

2010-02-12T08:56:00.000-08:00

The safety chain for the necklace must have a clasp attached to one end of the chain, as shown in photo. The spring ring clasp is attached to the chain by opening the small loop with a chain nose pliers, the chain is placed onto the loop, and close the loop with the pliers. See previous posts for complete instructions.

The chain may be a longer length if needed. If you like, this method may be used for the bracelet also.

How to add a safety chain to Bead Crochet jewelry

2010-02-11T07:13:00.000-08:00

Materials needed: completed bracelet , 2 jumprings, 3 inch chain, pliers, safety glasses

Step one: Open one of the jumprings and put it through one the of beads located a few rows
from the clasp. The bead hole may not accomodate the jumpring because the jumpring is too small in diameter or large wire gauge. Change to a larger diameter, a smaller wire gauge or both. Experiment with the correct size. Do not close the jumpring.

Step two. Add one end of the chain to the jumpring.

Step three. Close the jumpring. Picture shows closed jumpring with one end of chain attached.

Step four. Open another jumpring and put it through a bead on the other side of the clasp. Choose a bead a few rows from the clasp and directly across from the bead on the other side.

Step five. Put the end of the chain on your jumpring and close with your pliers. You're done!

Tip: Add a dab of glue to the seam of the jumprings.
The glue will be impossible to detect and the chain won't slip through.
My original tip published in Bead and Button Magazine - June 2009.

Please do not distribute, lend or copy. Please give credit to the designer.

Step 1. Ope